CLI commands
Note: The actual transmit power used may less than the value specified. The AP determines the
power to used based on the settings you made for regulatory domain, wireless mode, and
operating frequency.
antenna bidirectionnal
Supported on: MSM310 MSM320 MSM335 MSM410 MSM422
antenna bidirectionnal (diversity | main | auxiliary)
Sets the antenna to transmit and receive on. Select diversity to transmit and receive on both
antennas.
Parameters
diversity In this mode both antennas are used to transmit and receive. The AP
supports both transmit and receive diversity.
main Transmit and receive on the main antenna only.
aux Transmit and receive on the aux antenna only.
antenna gain
Supported on: MSM310 MSM320 MSM335 MSM410 MSM422
antenna gain <number>
Used only for Radar detection, records gain (in 5GHz band) of external antenna installed on
device. Does not affect output power.
autochannel skip
Supported on: MSM310 MSM320 MSM335 MSM410 MSM422
autochannel skip <chan>
Adds the specified channel to the list of channels that are not allowed to be selected by the Auto
Channel algorithm.
no autochannel skip <chan>
Removes the specified channel to the list of channels that are not allowed to be selected by the
Auto Channel algorithm.
beacon interval
Supported on: MSM310 MSM320 MSM335 MSM410 MSM422
beacon interval <value>
Sets the beacon interval.
Parameters
< value> Beacon interval value in the range 20 and 500 time units (TU) (1 TU =
1024us).
dot11 automatic frequency
Supported on: MSM310 MSM320 MSM335 MSM410 MSM422
dot11 automatic frequency
Enable this option to have the AP automatically determine the best operating frequency.
2-50
To Next Page
Loading...
Need help?
General
