HP MSM3xx

CLI commands
SNMP user context
Path: View > Enable > Config > SNMP user
This context provides commands for configuring SNMP user.
access level
Supported on: MSM310 MSM320 MSM335 MSM410 MSM422
access level (read-only | read-write)
Specifies the access level for this SNMP user.
end
Supported on: MSM310 MSM320 MSM335 MSM410 MSM422
end
Returns to a previous context.
password
Supported on: MSM310 MSM320 MSM335 MSM410 MSM422
password <password>
Specifies the password for this SNMP user.
security
Supported on: MSM310 MSM320 MSM335 MSM410 MSM422
security (md5-des | sha-aes)
Specifies the security for this SNMP user.
user name
Supported on: MSM310 MSM320 MSM335 MSM410 MSM422
user name <name>
Changes the name of this SNMP user.
2-82