CLI commands
no mandatory authentication
MAC-based authentication is not mandatory.
mac authentication radius profile
Supported on: MSM310 MSM320 MSM335 MSM410 MSM422
mac authentication radius profile <radiusname>
Specifies the name of the RADIUS profile to use for MAC-based authentication.
no mac authentication radius profile
Do not use a RADIUS profile.
mac authentication radius stationid case
Supported on: MSM310 MSM320 MSM335 MSM410 MSM422
mac authentication radius stationid case (uppercase | lowercase)
Specifies the case applied to the station delimiter if it is a letter.
mac authentication radius stationid delimiter
Supported on: MSM310 MSM320 MSM335 MSM410 MSM422
mac authentication radius stationid delimiter (null | colon | dash | dot | space
| comma | under)
Specifies the one-character delimiter that will be used to format both the calling station ID and the
called station ID attributes in RADIUS packets.
mac authentication
Supported on: MSM310 MSM320 MSM335 MSM410 MSM422
mac authentication
Enables support for MAC-based authentication.
no mac authentication
Disable support for MAC-based authentication.
add ip filter
Supported on: MSM310 MSM320 MSM335 MSM410 MSM422
add ip filter <ip address>/<mask>
Adds an IP filter to the list of destination addresses that traffic will be accepted for. All other
traffic will be blocked.
If the list is empty, then all wireless-to-wired LAN traffic is permitted.
Where:
<address> IP address.
</mask> Subnet mask in CIDR format. Specifies the number of bits in the mask.
2-61
To Next Page
Loading...
Need help?
General
