CLI commands
Syslog destination context
Path: View > Enable > Config > Syslog destination
This context provides commands for configuring Syslog destinations.
active
Supported on: MSM310 MSM320 MSM335 MSM410 MSM422
active
Enables logging to the current destination.
no active
Disables logging to the current destination.
logging facility
Supported on: MSM310 MSM320 MSM335 MSM410 MSM422
logging facility (local0 | local1 | local2 | local3 | local4 | local5 | local6 |
local7)
Sets the facility that is used when logging messages to a syslog server.
Parameters
<facility> Available facilities are: local0 - local7.
logging host
Supported on: MSM310 MSM320 MSM335 MSM410 MSM422
logging host (tcp | udp) <addr> [<number>]
Sets the remote address, the connection protocol and port of current syslog remote destination.
logging prefix
Supported on: MSM310 MSM320 MSM335 MSM410 MSM422
logging prefix <string>
Sets the prefix that will be prepended to all syslog messages.
no logging prefix
Removes the prefix that is prepended to all syslog messages.
name
Supported on: MSM310 MSM320 MSM335 MSM410 MSM422
name <name>
Renames the current syslog destination.
2-79
To Next Page
Loading...
Need help?
General
