ZPWY-MAP- Definitions
NonStop Pathway/iTS Management Programming Manual—426749-002
6-74
ZPWY-MAP-STATUS-TERMDETAIL
ZTCP
is the name of the controlling TCP.
ZERRORINFO
gives error information. The fields are described under ZPWY-DDL-ERROR-INFO
in this section.
ZFILE
is the file name of the device.
The following information is returned only if the TERM object is running or suspended:
ZWAIT
indicates whether the TERM object is ready or unable to proceed. ZWAIT can
contain the following values:
This ZWAIT Value… Indicates That The TERM Object…
ZPWY-VAL-BKPTHOLD Task is at an Inspect breakpoint.
ZPWY-VAL-CHECKPOINT Is waiting for completion of a checkpoint.
ZPWY-VAL-ENDTRANS Is waiting for the TMF software to complete an END-
TRANSACTION operation.
ZPWY-VAL-FROZEN Is waiting because it is currently attempting to
communicate with a frozen server class.
ZPWY-VAL-IMONIO Task is doing an I/O operation to the IMON process.
ZPWY-VAL-INSPECTFILE Task is waiting to communicate with the Inspect
process to perform some Inspect operation.
ZPWY-VAL-INSPECTIO Task is doing an I/O operation to the Inspect process.
ZPWY-VAL-ITMACQ Is waiting to report an error to the PATHMON process
or to obtain a tell message from the PATHMON
process.
ZPWY-VAL-ITMCOMP Is waiting for the completion of an error report to the
PATHMON process or the requested tell message
from the PATHMON process.
ZPWY-VAL-MEMMAN Is waiting for an internal memory management
request to complete.
ZPWY-VAL-PATHMONIO TCP is waiting for completion of an I/O request to an
external PATHMON process.
ZPWY-VAL-PATHMONOPEN TCP is opening an external PATHMON process.
ZPWY-VAL-PMCBLOCK TCP is waiting for the PATHMON process to become
unlocked. PMCBLOCK means PATHMON control
block lock.
ZPWY-VAL-READY Is ready.
To Next Page
Loading...
