HP NonStop Pathway/iTS - TERM Commands

NonStop Pathway/iTS Management Programming Manual—426749-002
8-1
8 TERM Commands
This section provides complete descriptions for the commands that enable you to
define and control configured TERM objects and control and inquire about temporary
TERM objects; the commands are listed in alphabetical order:
These commands configure and control SCREEN COBOL programs that control input-
output (I/O) devices, such as terminals and workstations, or control I/O processes that
enable users to communicate with a transaction processing application. You must
define a TERM object for each device. With these commands you can do the following:
•
Define and modify TERM object attributes
•
Add and delete TERM objects
•
Start and stop TERM objects
•
Return TERM object attribute and status information
For a brief description of each object type, see Object Types on page 3-6.
Commands Object Types
ZPWY-CMD-ABORT ZPWY-OBJ-TCPTERM
ZPWY-OBJ-TERM
ZPWY-CMD-ADD ZPWY-OBJ-TERM
ZPWY-CMD-ALTER ZPWY-OBJ-TERM
ZPWY-CMD-DELETE ZPWY-OBJ-TCPTERM
ZPWY-OBJ-TERM
ZPWY-CMD-FREEZESTATUS ZPWY-OBJ-SCTERM
ZPWY-CMD-INFO ZPWY-OBJ-TCPTERM
ZPWY-OBJ-TERM
ZPWY-CMD-INSPECT ZPWY-OBJ-TERM
ZPWY-CMD-RESUME ZPWY-OBJ-TCPTERM
ZPWY-OBJ-TERM
ZPWY-CMD-START ZPWY-OBJ-TCPTERM
ZPWY-OBJ-TERM
ZPWY-CMD-STATS ZPWY-OBJ-TERM
ZPWY-OBJ-TCPTERM
ZPWY-CMD-STATUS ZPWY-OBJ-TERM
ZPWY-OBJ-TCPTERM
ZPWY-CMD-STOP ZPWY-OBJ-TCPTERM
ZPWY-OBJ-TERM
ZPWY-CMD-SUSPEND ZPWY-OBJ-TCPTERM
ZPWY-OBJ-TERM