HP NonStop Pathway/iTS User Manual

Terminal Control Process (TCP) Commands
NonStop Pathway/iTS Management Programming Manual—426749-002
7-24
STATUS TCP
•
When a TCP from one Pathway subsystem requests a link to a server class in a
different Pathway subsystem, the PATHMON process controlling the server class
considers the TCP to be an external process. However, a STATUS TCP command
issued to the local the PATHMON process (the PATHMON process controlling the
server class) returns information about both the external and local TCPs.
•
The external TCP name is generated by the PATHMON process at the time of the
status request. To request the status of an external TCP, assign a name in the
following format to the ZTCP field in ZPWY-DDL-SEL-TCP:
E\system-name.$process-name
where
E Indicates an external TCP name.
\node-name Specifies the name of the NonStop system on which the
external TCP is running. This system can be the same as or
different from the system on which the PATHMON process is
running.
$process-
name
Specifies the external TCP process name.

HP NonStop Pathway/iTS Specifications

General

Brand	HP
Model	NonStop Pathway/iTS
Category	Software
Language	English