2–8 Hardware and Software Guide
Keyboard
The following 5 video transmission types, with examples of
devices that use them, are supported by the
fn+f4 hotkey:
■ LCD (notebook display)
■ External VGA (most external monitors)
■ S-Video (televisions, camcorders, VCRs, and video capture
boards with S-Video-in connectors)
■ Composite video (televisions, camcorders, VCRs, and video
capture boards with composite-video-in jacks)
■ Component video
✎
Composite video and component video devices can be
connected to the notebook only through an optional
HP notebook expansion product.
Initiate Standby (fn+f5)
The fn+f5 hotkey is set by default to initiate Standby. Standby can
be initiated only while the notebook is on. If the notebook is in
Hibernation, you must restore from Hibernation before you can
initiate Standby.
■ To restore from Hibernation briefly press the power/standby
button.
■ To resume from Standby, briefly press the power/standby
button, touch the TouchPad to initiate TouchPad activity, or
press any key on the keyboard.
For more information about using Standby and Hibernation, refer
to
“About Standby, Hibernation and Shutdown” in Chapter 3.
For information about changing the function of the fn+f5 hotkey,
refer to
“Managing Power Options” in Chapter 3.
To Next Page
Loading...
