HP ProCurve 2610 User Manual

Spanning-Tree Operation
802.1s Multiple Spanning Tree Protocol (MSTP)
Configuring MSTP Operation Mode and Global
Parameters
Command Page
spanning-tree protocol-version mstp page
5-60
spanning-tree config-name < ascii-string > page
5-60
spanning-tree config-revision < revision-number > page
5-61
spanning-tree max-hops < hop-count > page
5-61
spanning-tree force-version
< stp-compatible | rstp-operation | mstp-operation>
page
5-62
spanning-tree hello-time < 1..10 > page
5-62
The commands in this section apply on the switch level, and do not affect
individual port configurations.
5-59

HP ProCurve 2610 Specifications

General

Switching Capacity	12.8 Gbps
Forwarding Rate	9.5 Mpps
MAC Address Table Size	8000 entries
Layer	Layer 2
RAM	64 MB
Flash Memory	16 MB
Jumbo Frame Support	Yes
Manageable	Yes
Operating Humidity	15% to 95% non-condensing
Ports	24 x 10/100
VLANs	256
Management	Web, CLI, SNMP
Power Supply	Internal
Operating Temperature	0°C to 40°C
Dimensions (W x D x H)	17.42 x 12.73 x 1.73 in