HP ProCurve 2610 User Manual

ProCurve Stack Management
Configuring Stack Management
4. To display Stack Configuration menu for the switch you are moving, select
3. Stack Configuration
5. Press
[E] (for Edit) to select the Stack State parameter.
6. Use the Space bar to select Member, then press [v] to move to the Com-
mander MAC Address field.
7. Enter the MAC address of the destination Commander and press
[Enter].
8. Press
[S] (for Save).
Monitoring Stack Status
Using the stacking options in the menu interface for any switch in a stack, you
can view stacking data for that switch or for all stacks in the subnet (broadcast
domain). (If you are using VLANs in your stack environment, see “Stacking
Operation with a Tagged VLAN” on page 8-45.) This can help you in such ways
as determining the stacking configuration for individual switches, identifying
stack Members and Candidates, and determining the status of individual
switches in a stack. See table 8-5 on page 8-26.
Table 8-5. Stack Status Environments
Screen Name Commander Member Candidate
Stack Status (This Switch) • Commander’s stacking
configuration
• Data on stack Members:
– Switch Number
•
•
•
Member’s stacking configurati
Member Status
Data identifying Member’s
Commander:
on
Candidate’s stacking
configuration
– MAC Address
– Commander Status
– System Name
– Commander IP Address
– Device Type
– Commander MAC Address
– Status
Stack Status (All) Lists devices by stack name
or Candidate status (if device
is not a stack Member).
Includes:
Same as for Commander. Same as for
Commander.
• Stack Name
• MAC Address
• System Name
• Status
8-26

HP ProCurve 2610 Specifications

General

Brand	HP
Model	ProCurve 2610
Category	Switch
Language	English