Quality of Service (QoS): Managing Bandwidth More Effectively
Using QoS Classifiers To Configure QoS for Outbound Traffic
Using QoS Classifiers To Configure QoS
for Outbound Traffic
QoS Feature Default Menu CLI Web
UDP/TCP Priority Disabled — page 6-21 Refer to Online Help.
IP-Device Priority Disabled — page 6-28 “
IP Type-of-Service Priority Disabled — page 6-34 “
VLAN-ID Priority Disabled — page 6-46 “
Source-Port Priority Disabled — page 6-52 “
Note In addition to the information in this section on the various QoS classifiers,
refer to “QoS Operating Notes and Restrictions” on page 6-66.
Viewing the QoS Configuration
Examples of the show qos output are included with the example for each
priority type.
Syntax: show qos < priority-classifier >
tcp-udp-port-priority
Displays the current TCP/UDP port priority
configuration. Refer to figure 6-9 on page 6-27.
device-priority
Displays the current device (IP address) priority
configuration. Refer to figure 6-10 on page 6-30.
type-of-service
Displays the current type-of-service priority
configuration. The display output differs according to
the ToS option used:
■ IP Precedence: Refer to figure 6-14 on page 6-35.
■ Diffserve: Refer to figure 6-16 on page 6-39.
6-20
To Next Page
Loading...
