HP ProCurve 2610 User Manual

ProCurve Stack Management
Overview
Overview
This chapter describes how to use your network to stack switches without the
need for any specialized cabling. For an overview of stacking features, refer
to the table on page 8-4.
For general information on how to use the switch’s built-in interfaces, see:
■ Chapter 3, “Using the Menu Interface”
■ Chapter 4, “Using the Command Line Interface (CLI)”
■ Chapter 5, “Using the Web Browser Interface
■ Chapter 6, “Switch Memory and Configuration”
8-3

HP ProCurve 2610 Specifications

General

Switching Capacity	12.8 Gbps
Forwarding Rate	9.5 Mpps
MAC Address Table Size	8000 entries
Layer	Layer 2
RAM	64 MB
Flash Memory	16 MB
Jumbo Frame Support	Yes
Manageable	Yes
Operating Humidity	15% to 95% non-condensing
Ports	24 x 10/100
VLANs	256
Management	Web, CLI, SNMP
Power Supply	Internal
Operating Temperature	0°C to 40°C
Dimensions (W x D x H)	17.42 x 12.73 x 1.73 in