IP Routing Features
Configuring Static IP Routes
For example, Figure 7-7 illustrates a routing topology with two possible
gateways to support a static route from switch “A” to the 10.31.224.0 network
in switch “C”.
VLAN 29: 10.29.224.1
VLAN 30: 10.30.224.3
Switch “A”
VLAN 29: 10.29.224.2
VLAN 30: 10.30.224.1
Switch “B”
VLAN 30: 10.30.224.2
VLAN 31: 10.31.224.1
Switch “C”
Destination Network
In this example, a static route to
the 10.31.224.0 network has been
configured in switch “A”. In this
case, 10.30.224.1 is the configured
gateway.
Figure 7-7. Example of a Routed Network
Figure 7-8 illustrates the show ip route output describing the routes available
in the above topology.
7-20
To Next Page
Loading...
