HP ProCurve 2610 User Manual

IP Routing Features
Configuring DHCP Relay
■ Relay agents without Option 82 can exist in the path between Option
82 relay agents and an Option 82 server. The agents without Option
82 will forward client requests and server responses without any
effect on Option 82 fields in the packets.
■ If the routing switch is not able to add an Option 82 field to a client’s
DHCP request due to the message size exceeding the MTU (Maximum
Transmission Unit) size, then the request is forwarded to the DHCP
server without Option 82 information and an error message is logged
in the switch’s Event Log.
7-41

HP ProCurve 2610 Specifications

General

Switching Capacity	12.8 Gbps
Forwarding Rate	9.5 Mpps
MAC Address Table Size	8000 entries
Layer	Layer 2
RAM	64 MB
Flash Memory	16 MB
Jumbo Frame Support	Yes
Manageable	Yes
Operating Humidity	15% to 95% non-condensing
Ports	24 x 10/100
VLANs	256
Management	Web, CLI, SNMP
Power Supply	Internal
Operating Temperature	0°C to 40°C
Dimensions (W x D x H)	17.42 x 12.73 x 1.73 in