To Next Page

To Previous Page

Static Virtual LANs (VLANs)

Port-Based Virtual LANs (Static VLANs)

The follow examples illustrate the displayed output depending on whether the

detail option is used.

ProCurve(config)# show vlan ports a1-a33

Status and Counters - VLAN Information - for ports A1-A33

VLAN ID Name | Status Voice Jumbo

------- ----------------- + ---------- ----- -----

1 DEFAULT_VLAN | Port-based No No

10 VLAN_10 | Port-based Yes No

20 VLAN_20 | Protocol No No

33 GVRP_33 | Dynamic No No

ProCurve#

Figure 2-20. Example of “Show VLAN Ports” Cumulative Listing

ProCurve(config)# show vlan ports a1-a4 detail

Status and Counters - VLAN Information - for ports A1

Port name: Voice_Port

VLAN ID Name | Status Voice Jumbo Mode

------- ----------------- + ---------- ----- ----- ------

1 DEFAULT_VLAN | Port-based No No Untagged

10 VLAN_10 | Port-based Yes No Tagged

Status and Counters - VLAN Information - for ports A2

Port name: Uplink_Port

VLAN ID Name | Status Voice Jumbo Mode

------- ----------------- + ---------- ----- ----- ------

1 DEFAULT_VLAN | Port-based No No Untagged

20 VLAN_20 | Protocol No No Tagged

33 GVRP_33 | Dynamic No No Tagged

Figure 2-21. Example of “Show VLAN Ports” Detailed Listing

2-25

Other manuals for HP ProCurve 2610

Questions and Answers:

Need help?

Do you have a question about the HP ProCurve 2610 and is the answer not in the manual?

General