HP ProCurve Series 2810 User Manual

5-19
Multiple Instance Spanning-Tree Operation
802.1s Multiple Spanning Tree Protocol (MSTP)
Configuring MSTP Operation Mode and Global
Parameters
The commands in this section apply on the switch level, and do not affect
individual port configurations.
Command Page
spanning-tree config-name < ascii-string > page
5-20
spanning-tree config-revision < revision-number > page
5-20
spanning-tree max-hops < hop-count > page
5-21
spanning-tree maximum-age page
5-21
spanning-tree force-version
< stp-compatible | rstp-operation | mstp-operation>
page
5-21
spanning-tree hello-time < 1..10 > page
5-22
spanning-tree legacy-mode page
5-22
spanning-tree legacy-path-cost page
5-22

HP ProCurve Series 2810 Specifications

General

Layer	Layer 2
Form Factor	Rack-mountable
Power Supply	Internal
Jumbo Frame Support	Yes
Uplink Ports	4 x dual-personality ports (10/100/1000 or mini-GBIC)
Switching Capacity	48 Gbps
Throughput	35.7 Mpps
Forwarding Rate	35.7 million pps
Management	Web, SNMP, CLI
MAC Address Table Size	16000 entries
Routing Protocol	Static routing
Features	VLAN support, QoS, IGMP snooping
Operating Temperature	32°F to 113°F (0°C to 45°C)
Operating Humidity	15% to 95% non-condensing
Model	HP ProCurve Series 2810
Ports	24 x 10/100/1000 (Gigabit)