HP ProCurve Series 2810 User Manual

7-5
ProCurve Stack Management
Operation
■ Simplify management of small workgroups or wiring closets while
scaling your network to handle increased bandwidth demand.
■ Eliminate any specialized cables for stacking connectivity and
remove the distance barriers that typically limit your topology options
when using other stacking technologies.
■ Add switches to your network without having to first perform IP
addressing tasks.
Which Devices Support Stacking?
As of April, 2006, the following ProCurve devices support stacking:
■ ProCurve Switch 6108
■ ProCurve Switch 4104GL
■ ProCurve Switch 4108GL
■ ProCurve Switch 2810
■ ProCurve Switch 2650
■ ProCurve Switch 2626
■ ProCurve Switch 2512
■ ProCurve Switch 2524
■ ProCurve Switch 8000M*
■ ProCurve Switch 4000M*
■ ProCurve Switch 2424M*
■ ProCurve Switch 2400M*
■ ProCurve Switch 1600M*
*
Requires software release C.08.03 or later, which is included with the 8000M, 4000M,
2424M, and 1600M models as of July, 2000. Release C.08.03 or a later version is also
available on the ProCurve website at www.procurve.com. (Click on software.)

HP ProCurve Series 2810 Specifications

General

Layer	Layer 2
Form Factor	Rack-mountable
Power Supply	Internal
Jumbo Frame Support	Yes
Uplink Ports	4 x dual-personality ports (10/100/1000 or mini-GBIC)
Switching Capacity	48 Gbps
Throughput	35.7 Mpps
Forwarding Rate	35.7 million pps
Management	Web, SNMP, CLI
MAC Address Table Size	16000 entries
Routing Protocol	Static routing
Features	VLAN support, QoS, IGMP snooping
Operating Temperature	32°F to 113°F (0°C to 45°C)
Operating Humidity	15% to 95% non-condensing
Model	HP ProCurve Series 2810
Ports	24 x 10/100/1000 (Gigabit)