HP ProCurve Series 2810 User Manual

7-14
ProCurve Stack Management
Configuring Stack Management
Using the Menu Interface To View Stack Status
and Configure Stacking
Using the Menu Interface To View and Configure
a Commander Switch
1. Configure an IP address and subnet mask on the Commander switch.
(See the chapter on IP addressing in the Management and Configuration
Guide.)
2. Display the Stacking Menu by selecting Stacking in the Main Menu.
Figure 7-5. The Default Stacking Menu

HP ProCurve Series 2810 Specifications

General

Brand	HP
Model	ProCurve Series 2810
Category	Switch
Language	English