HP ProCurve Series 2810 User Manual

6-67
Quality of Service (QoS): Managing Bandwidth More Effectively
QoS Operating Notes and Restrictions
■ RADIUS Authentication: RADIUS authentication allowing traffic
through a given port may override the port’s QoS configuration, which
generates an Event Log message. When the authenticated host discon-
nects, the port returns to the static QoS configuration.
■ Not Supported: Use of an inbound 802.1p packet priority as a type for
remapping a packet’s outbound priority to different 802.1p priority. For
example, where inbound packets carry an 802.1p priority of 1, QoS cannot
be configured use this priority as a type for changing the outbound priority
to 0.

HP ProCurve Series 2810 Specifications

General

Layer	Layer 2
Form Factor	Rack-mountable
Power Supply	Internal
Jumbo Frame Support	Yes
Uplink Ports	4 x dual-personality ports (10/100/1000 or mini-GBIC)
Switching Capacity	48 Gbps
Throughput	35.7 Mpps
Forwarding Rate	35.7 million pps
Management	Web, SNMP, CLI
MAC Address Table Size	16000 entries
Routing Protocol	Static routing
Features	VLAN support, QoS, IGMP snooping
Operating Temperature	32°F to 113°F (0°C to 45°C)
Operating Humidity	15% to 95% non-condensing
Model	HP ProCurve Series 2810
Ports	24 x 10/100/1000 (Gigabit)