HP ProCurve Series 2810 User Manual

7-24
ProCurve Stack Management
Configuring Stack Management
To remove a Member from a stack, use the Stack Management screen.
1. From the Main Menu, select:
9. Stacking...
4. Stack Management
You will then see the Stack Management screen:
Figure 7-13. Example of Stack Management Screen with Stack Members Listed
2. Use the downarrow key to select the Member you want to remove from
the stack.
Figure 7-14. Example of Selecting a Member for Removal from the Stack
3. Type
[D] (for Delete) to remove the selected Member from the stack. You
will then see the following prompt:
Figure 7-15. The Prompt for Completing the Deletion of a Member from the Stack
For status descriptions,
see the table on page
7-48.
Stack Member List

HP ProCurve Series 2810 Specifications

General

Layer	Layer 2
Form Factor	Rack-mountable
Power Supply	Internal
Jumbo Frame Support	Yes
Uplink Ports	4 x dual-personality ports (10/100/1000 or mini-GBIC)
Switching Capacity	48 Gbps
Throughput	35.7 Mpps
Forwarding Rate	35.7 million pps
Management	Web, SNMP, CLI
MAC Address Table Size	16000 entries
Routing Protocol	Static routing
Features	VLAN support, QoS, IGMP snooping
Operating Temperature	32°F to 113°F (0°C to 45°C)
Operating Humidity	15% to 95% non-condensing
Model	HP ProCurve Series 2810
Ports	24 x 10/100/1000 (Gigabit)