HP ProLiant ML310 Maintenance And Service Guide

Removal and Replacement Procedures
Server Warnings and Precautions
WARNING: To reduce the risk of injury from electric shock, disconnect all power cords
to completely remove power from the server.
WARNING: To reduce the risk of personal injury from hot surfaces, allow the internal
server components to cool before touching them.
CAUTION: Protect the server from power fluctuations and temporary interruptions with a
regulating uninterruptible power supply (UPS). This device protects the hardware from
damage caused by power surges and voltage spikes, and keeps the server in operation
during a power failure.
CAUTION: The server must always be operated with server unit covers on. Proper cooling is
not achieved when the server unit covers are removed.
HP ProLiant ML310 Server Maintenance and Service Guide 2-5

HP ProLiant ML310 Specifications

General

Form Factor	Tower
Processor Sockets	1
Maximum Memory	32GB
Memory Slots	4
Storage Controller	HP Dynamic Smart Array B120i
Processor	Intel Xeon E3-1200 series
Memory Type	DDR3
RAID Support	RAID 0, 1, 10
Storage	Up to 4 LFF (3.5-inch) drives
Hard Drive Interface	SATA
Network	1Gb Ethernet
Power Supply	350W
Operating System Support	Red Hat Enterprise Linux, SUSE Linux Enterprise Server
Expansion Slots	1 x PCIe 2.0 x1