Table 39 Error codes (part code 4005) (continued)
Severity
Level
Recommended ActionError MessageError
Number
Part
Code
EInstall the necessary program product.The specified function is not available
because it requires Open System Array
Management.
555404005
WInstall the required program product.The specified function is not available
because it requires Mainframe Array
Management.
555414005
EIf this problem persists, please contact
HP Technical Support.
An error occurred during SVP
processing.
555424005
WCheck the setting.An LDEV number that does not apply to
the selected CU group has been
specified.
555764005
WTo use the prestaging function, set the
prestaging area by using Cache
Residency.
The prestaging is not executed because
the prestaging area does not exist.
Check the Cache Residency setting.
565424005
WWait, then retry the operation.The current Cache Residency setting
cannot be changed because the sidefile
size exceeds the threshold.
585114005
EWait, then retry the operation.The current Cache Residency setting
cannot be changed because the
prestaging operation is in progress.
Please wait for a while, and then retry
the operation.
585124005
WWait, refresh the window, then retry the
configuration operation. Or check if
storage system is blocked. If the problem
persists, please contact HP Technical
Support.
Prestaging not completed.585134005
EPlease contact HP Technical Support.Currently running microcode version
does not support the specified operation.
585144005
WWait, then retry the operation.The specified operation cannot be
executed because one of the following
maintenance operations is in progress:
• LDEV formatting
• Correction Copy
• Drive Copy
• Changing the CHA/DKA status
• Changing the cache status
• Replacing an OEM drive microcode
• LDEV Shredding or Extent Shredding
• Extent Shredding is in progress
Therefore the specified operation cannot
be executed.
587094005
112 Message (part code group 4nnn)
To Next Page
Loading...
