HP StorageWorks P9000 - Page 166

Table 50 Error codes (part code 6005) (continued)
Severity LevelRecommended ActionError MessageError
Number
Part
Code
WSpecify another volume, or
release the LU path
definition.
The operation failed, because the
specified volume was defined in the LU
path.
688736005
WCheck the emulation type of
the volume.
The operation failed, because the
emulation type of the specified volume
was not OPEN -V.
688746005
WSelect another volume, or
release the LUSE setting.
The operation failed, because the
specified volume was a LUSE volume.
688756005
ESelect a parity group of an
external volume that is
composed of a single LDEV.
The operation failed, because the parity
group of the specified external volume
was composed of two or more LDEVs.
688766005
WSelect another volume, or
release the Business Copy
setting.
The operation failed, because the
specified volume was a reserved
volume of Business Copy.
688776005
WSelect another volume, or
release the journal volume
setting.
The operation failed, because the
specified volume was a journal volume.
688786005
ESelect another volume, or
release the pool volume
setting.
The operation failed, because the
specified volume was a pool volume.
688796005
ESelect another volume, or
release the Auto LUN setting.
The operation failed, because the
specified volume was used for Auto
LUN.
688806005
WSelect another volume.The operation failed, because the
specified volume was used as a system
disk.
688816005
WCheck the following
conditions on the external
volume specified for the
quorum disk.
• If it is blocked.
• If a path is defined.
The operation failed, because the
quorum disk was inaccessible.
688826005
WCheck the serial number of
the quorum disk.
The operation failed, because the
specified serial number was different
from the serial number of the quorum
disk.
688836005
WCheck the status of the
quorum disk.
The operation failed, because the
quorum disk was blocked.
688896005
WSpecify the serial number of
RCU and retry the operation.
The operation failed, because the
specified serial number was not RCU
but MCU.
688906005
WConfirm the serial numbers
of MCU and RCU, and the
quorum disk ID.
The operation failed, because the
following specified parameters did not
match the information in the quorum
disk.
• Serial number of MCU
• Serial number of RCU
• Quorum disk ID
688916005
166 Message (part code group 6nnn)