HP StorageWorks P9000 - Page 253

Table 62 Error codes (part code 7105) (continued)
Severity
Level
Recommended ActionError MessageError
Number
Part
Code
WDelete the Remote Copy pair.You cannot reserve the volume, because
a remote copy pair exists in the same
subsystem frame.
85027105
WDelete the Remote Copy pair.You cannot create the new pair, because
a remote copy pair exists in the same
subsystem frame.
85037105
WConfirm the composition, the status, or
the volume status of the pair. (See the
HP StorageWorks P9000 Business Copy
for Mainframe Systems User Guide for
the relation between the composition of
the pair, status of the pair, or the volume
status of the pair and those operations.)
The command was rejected. Check the
composition, the status, or the volume
status of the pair.
85047105
ESee the section "Status, permitted pair
operations" in the HP StorageWorks
P9000 Business Copy for Mainframe
Systems User Guide for the relation
between the status of pairs and the
commands that can be accepted.
The command has been rejected,
because the operation cannot be
accepted in the current pair status.
85057105
WVary the T-VOL or the reserved volume
offline from the mainframe host, then
issue the command again.
The command has been rejected,
because the specified T-VOL or reserved
volume is used by the host.
85067105
WYou cannot execute the Split Pair
operation because the pair is already in
the split status.
The Split Pair command was issued to
the pairs in the split status.
85077105
WYou cannot execute the Add Pair
operation for pairs in the split status.
The Add Pair command was issued to
the pairs in the split status.
85087105
WCheck the contents, and then retry.The Split command with the QUIESCE
specification was issued to a secondary
boot device.
85097105
WCheck the contents, and then retry.The M-VOL Suspend command was
issued to a secondary boot device.
85107105
WDetach the S-VOL from the host, or delete
the Remote Copy path.
You cannot reserve the volume, because
a path group is set.
85117105
WDetach the S-VOL from the host, or delete
the Remote Copy path.
Cannot perform Resync or Suspend
operation because of the path group
setting.
85127105
WVary the S-VOL offline from the
mainframe host, then issue the command
again.
The command has been rejected,
because the specified S-VOL is used by
the host.
85137105
WDelete the Reserve volume.No reserved volume can be allocated.85147105
WCheck the contents, and retry.The number of cylinders in the reserved
volume exceeds the maximum.
85157105
WCheck the contents, and retry.The number of S-VOL cylinders exceeds
the maximum.
85167105
WCheck the contents, and retry.The number of T-VOL cylinders exceeds
the maximum.
85177105
Part code 7105 253