EasyManua.ls Logo

HP StorageWorks P9000 - Page 51

HP StorageWorks P9000
333 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Table 22 Error codes (part code 00622) (continued)
Severity
Level
Recommended ActionError MessageError
Number
Part
Code
WSee the manual of the external device
and check the setting of the external
volume.
An external volume that can be added
was not found by the result of
VolumeDiscovery.
10524100622
WResolve the cause of the error, or only
select an available external volume.
An external volume is selected, where
Volume Discovery executed ends with
an error.
10524200622
WCheck the setting(s).The emulation type that cannot coexist
is set.
10524300622
WCheck the contents of the path
configuration.
The specified external volume cannot be
set because the path configuration is
different.
10524400622
WCheck the setting(s).Failed to allocate a LDEV ID.10524500622
WCheck the setting(s).Failed to allocate a SSID.10524600622
WResolve the cause of the error, or only
select an available external volume.
The external volume is not supported.10525100622
WCheck the setting(s).Only one LDEV can be set because the
attribute of the specified external volume
is Remote Command Device.
10525500622
WCheck the setting(s).Only one LDEV can be set because the
specified external volume is in the data
transfer mode.
10525600622
WCheck the setting(s).LDEV Name cannot be set because the
value is out of range.
10525700622
WSelect one or more normal path, or
restore the path.
The path cannot be changed because
there will be no normal path for the
external volume.
10525800622
WEdit LDEVs, or recreate external volumes
if you want to register the LDEV Name.
LDEV Name can not be registered
because there is a volume that failed to
be created as an external volume.
10526200622
WReduce the number of external volumes
to be mapped, then retry the operation.
Or, check the initial-number of LDEV ID
or the interval setting.
Insufficient logical volumes to map the
external volumes.
10526500622
WReduce the number of external volumes
to be mapped, then retry the operation.
Insufficient logical volumes to map the
external volumes.
10526600622
WVerify the available ports.You do not have a permission to treat
the ports where the specified WWNs
are derived from.
10526700622
WVerify the available ports.You do not have a permission to treat
the ports where the paths composing the
specified external path groups are
derived from.
10526800622
WVerify the available parity groups.You do not have a permission to treat
the specified external volumes.
10526900622
WVerify the available LDEVs.You do not have a permission to treat
the LDEVs that are included in the
specified external volumes.
10527000622
Part code 00622 51

Table of Contents

Other manuals for HP StorageWorks P9000

Related product manuals