Table 33 Error codes (part code 03022) (continued)
Severity
Level
Recommended ActionError MessageError
Number
Part
Code
WCheck the setting(s).An LDEV in Normal or Quick Formatting
status is selected.
10517903022
WCheck the setting(s).The selected LDEV has a reserved volume
setting of Auto LUN.
10518003022
ECheck the setting(s).Quick formatting cannot be executed
because the number of party groups
exceeds 36.
10518103022
WCheck the setting(s).It is not available to change other than
the newly allocated SSIDs.
10518203022
WCheck the setting(s).The same SSID is specified.10518303022
WCheck the setting(s).Quick formatting cannot be executed
because the number of party groups
exceeds 36.
10518403022
WCheck the setting(s).Pools of different types are specified.10518503022
WCheck the setting(s).No more V-VOL can be added to the
selected pool.
10518603022
WCheck the setting(s).A pool in the abnormal state is selected.10518703022
WCheck the setting(s).There is no LDEV ID that can be set in
the selected pool.
10518803022
WCheck the setting(s).An LDEV cannot be added because the
free space in the selected pool is
insufficient.
10518903022
ECheck the setting(s).LDEV that has already been set has been
selected.
10519103022
ECheck the setting(s).LDEV not set has been selected.10519203022
ECheck the setting(s).The number of data patterns exceeds the
setting range.
10519303022
EExecute refresh, then retry the operation.
If the same problem persists despite
retrying, please contact HP Technical
Support.
An error occurred while formatting.10519403022
EExecute refresh, then retry the operation.
If the same problem persists despite
retrying, please contact HP Technical
Support.
An error occurred while preparing the
quick format.
10519503022
ECheck the setting(s).Any further, the Pool that selects it cannot
set the volume.
10520503022
EExecute refresh, then retry the operation.
If the same problem persists despite
retrying, please contact HP Technical
Support.
An error occurred in the shredding
processing.
10523103022
ESpecify another unused SSID number.The same SSID is specified.10523203022
EEnter the SSID number with 4 digits.The specified number of digits for SSID
is incorrect.
10523303022
EExecute refresh.The processing cannot continue due to
an internal logical contradiction.
10524803022
94 Message (part code group 3nnn)
To Next Page
Loading...
