Characteristic Specification
LTO-7 and LTO-8 LTO-5 and LTO-6
Operating 20% to 80% RH (noncondensing, max wet bulb temperature = 26C)
Nonoperating 10% to 90% RH noncondensing 10% to 95% RH noncondensing
Electrical specifications
Table 23: Electrical specifications
Characteristic Specification
Current 5.0—3.5 A
Voltage 100—240 V 50/60 Hz
Power 350 W
Regulatory specifications
Table 24: Product safety test conditions
Characteristic Tested condition or value
Equipment mobility Stationary—rack mount
Connection to the mains Pluggable—Type A
Operating condition Continuous
Access location Operator accessible
Over voltage category (OVC) OVC II
Mains supply tolerance (%) or absolute
mains supply values
-10%, +6%
Tested for IT power systems No
IT testing, phase-phase voltage (V) N/A
Class of equipment Class I
Considered current rating (A) 20 A (branch circuit protection)
Pollution degree (PD) PD 2
Table Continued
Electrical specifications 239
To Next Page
Loading...
