Event
code
Message and description Details and solution
4124 Drive or media statistics could not be
retrieved when unloading the tape.
1. Check the event log for additional events
that provide more specific information.
2. If media-related tape alert events are
reported, replace the media.
4125 Potential conflict: Tape drive has been
accessed by multiple initiators.
1. View the list of host WWNN addresses
listed in the event text.
• If only one host can have access the
tape drive, ensure that the other hosts
are not allowed to access the tape
drive.
• If multiple hosts will access the tape
drive, disable multi-initiator SCSI
detection for the partition with the
drive.
2. Close the event and continue normal use
of the tape drive.
Configuration change events
Table 19: Configuration change events
Event code Message and description
8000 The configuration of a drive changed.
8001 The drive was added or removed from the system.
8002 A partition was added/removed or changed.
8003 A mailslot bank was enabled/disabled.
8004 Drive firmware changed due to firmware upgrade.
8005 The configuration of hostname/domain name has changed.
8006 The email configuration settings have been changed.
8007 The configuration of a date/time format changed.
8008 The system language setting changed.
Table Continued
232 Configuration change events
To Next Page
Loading...
