See the product QuickSpecs for a list of supported cables.
Operation problems
• Power problems
◦ The library does not power on
◦ No messages on the OCP
• Tape movement problems
◦ Cartridge stuck in drive
◦ Cartridge stuck in storage slot
• Media problems
◦ Cartridge incompatible with drive
◦ Cannot read or write to data cartridge
◦ The library reports an obstruction in a storage slot or does not see a data cartridge
◦ Cannot load a cleaning cartridge
• Attention LED is illuminated
◦ The attention and cleaning LEDs are illuminated
◦ A particular cartridge sets off the cleaning light
◦ A cartridge recently imported from a different environment is causing issues
◦ The attention LED is illuminated but the cleaning LED is not illuminated after a cartridge
load
◦ A particular cartridge sets off the attention LED and possibly the cleaning LED
• Inventory problems
◦ The library displays incorrect barcodes
• RMI network connection issues
◦
Cannot connect to the RMI
• Data Verification problems
Operation problems 169
To Next Page
Loading...
