Procedure
1. Navigate to the Configuration > Secure Manager screen.
2. Click Edit next to Host Configuration.
3. Click Create Host, and then click Next.
4. Enter a name for the host for use within Secure Manager and the WWPN, and then click Finish.
NOTE:
The wizard does not verify that the host exists or is accessible.
NOTE:
Using Modify Host to give a discovered host WWPN a more recognizable name can simplify future
configuration changes in a large SAN.
5. Click Submit.
Changing the name of a host when using Secure Manager
Procedure
1. Navigate to the Configuration > Secure Manager screen.
2. Click Edit next to Host Configuration.
3. Select a host from the list of Current Hosts, click Modify Host, and then click Next.
4. Enter a name for the host for use within Secure Manager, and then click Finish.
5. Click Submit.
Deleting a host when using Secure Manager
Procedure
1. Navigate to the Configuration > Secure Manager screen.
2. Click Edit next to Host Configuration.
3. Select a host from the list of Current Hosts, click Delete Host, and then click Finish.
4. Verify that you want to delete the host.
5. Click Submit.
NOTE:
Deleted hosts will be readded if they are rediscovered and added to an access control group.
Maintaining the library
From the Home screen, click or tap on Maintenance to access the library maintenance features.
Changing the name of a host when using Secure Manager 97
To Next Page
Loading...
