HP xw6400 User Manual

Heading Option Description
NOTE If the setup password is set, you must enter Computer Setup (F10) Utility to
change it, flash the ROM, and make changes to certain plug-and-play settings under
Windows.
Power-On
Password
Allows you to set and enable power-on password.
Password
Options
Lock Legacy Resources
Prevents the operating system from reassigning plug-and-play resources for serial, parallel, and
diskette legacy I/O devices.
Network Server Mode
Enable or disable Network Server Mode, which enables the workstation to boot the operating
system when the power-on password is enabled with or without a keyboard or mouse attached.
When attached to the system, the keyboard and mouse remain locked until the power-on password
is entered.
Password Prompt on Warm Boot
Sets the Password Prompt on Warm Boot function. If disabled, the BIOS will only prompt for a
password after power-on
Smart Cover Allows you to disable cover removal sensor or to notify user if sensor has been activated. If
disabled, the BIOS will only prompt for a password after power-on.
Device Security Makes the following devices available or unavailable to the system:
●
Serial port
●
Parallel port
●
All USB ports
●
Front USB ports
●
System audio
●
Controller security
●
SATA controller security
●
IEEE 1394 controller
●
Network controller
For each device, Device available is the default setting and allows the operating system access
to the device. Device Hidden makes the device unavailable; it is disabled by the BIOS and cannot
be enabled by the operating system.
Network
Service Boot
Enables a Network Service Boot, which boots using the NIC PXE option ROM. In this case, the
actual boot image resides on a remote server. When enabled, you can set the boot order of the
NIC PXE option ROM and force a network boot by pressing F12 during POST.
System IDs Asset Tag
A 16–byte string identifying the system.
Ownership Tag
An 80–byte string identifying ownership of the system. This tag is displayed on the screen during
POST.
UUID (Universal Unique Identifier)
Table 3-1 Computer Setup (F10) Utility menu descriptions (continued)
ENWW Computer Setup (F10) Utility 29

HP xw6400 Specifications

General

Chipset	Intel 5000X
Storage	SATA or SAS hard drives
Power Supply	650W
Memory	Up to 16 GB DDR2
Expansion Slots	2 PCIe x16
Network	Integrated Gigabit Ethernet
Operating System	Windows XP Professional
Graphics	NVIDIA Quadro FX series