HP xw6400 User Manual

Configuring system BIOS
Configure the system BIOS to enable embedded SATA RAID functionality.
1. Press F10 to enter the system BIOS setup.
2. Use the arrow keys to highlight the desired language, then press Enter.
3. Use the arrows on your keyboard to highlight Storage>Storage Options, then press Enter.
4. Use the up or down arrow key to highlight SATA Emulation.
5. Use the left or right arrow key to select RAID/AHCI.
6. Press F10 to accept the new setting.
7. Use the arrows on your keyboard to highlight Advanced > Power-On Options, then press
Enter.
8. Use the up or down arrow key to highlight POST Messages.
9. Use the left or right arrow key to select Enable.
10. Press F10 to accept the new setting.
11. Use the arrow keys to highlight Advanced>Device Options, and press Enter.
12. Use the up or down arrow key to highlight SATA RAID Option ROM Download, and press
Enter.
13. Use the left or right arrow key to select Enable.
14. Press F10 to accept the new setting.
15. Use the arrows on your keyboard to highlight File>Save Changes and Exit, and press Enter.
16. Press F10 when prompted.
ENWW Configuring system BIOS 147

HP xw6400 Specifications

General

Chipset	Intel 5000X
Storage	SATA or SAS hard drives
Power Supply	650W
Memory	Up to 16 GB DDR2
Expansion Slots	2 PCIe x16
Network	Integrated Gigabit Ethernet
Operating System	Windows XP Professional
Graphics	NVIDIA Quadro FX series