HP xw6400 User Manual

Figure 4-28 Installing the PCI Express card
Front PCI card guide and fan removal (optional)
NOTE The fan is only used for special configurations, but the card guide is used with all full-
length add-in cards.
1. Disconnect power from the system (Predisassembly procedures on page 57), remove the side
access panel (
Side access panel on page 63), and remove the front bezel (Front Bezel
on page 64).
2. Disconnect the fan wire 1 from the connector on the system board.
3. Release the two card guide latches 2 (only one illustrated). Pivot the card guide toward the system
board 3, and lift it out of the chassis 4.
Figure 4-29 Removing the front fan
ENWW Removal and replacement of components 81

HP xw6400 Specifications

General

Chipset	Intel 5000X
Storage	SATA or SAS hard drives
Power Supply	650W
Memory	Up to 16 GB DDR2
Expansion Slots	2 PCIe x16
Network	Integrated Gigabit Ethernet
Operating System	Windows XP Professional
Graphics	NVIDIA Quadro FX series