EasyManua.ls Logo

HPE FlexNetwork 5130 HI SERIES

HPE FlexNetwork 5130 HI SERIES
286 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
19
Configuring MAC address entries
Configuration guidelines
• You cannot add a dynamic MAC address entry if a learned entry already exists with a different
outgoing interface for the MAC address.
• The manually configured static, blackhole, and multiport unicast MAC address entries cannot
survive a reboot if you do not save the configuration. The manually configured dynamic MAC
address entries are lost upon reboot whether or not you save the configuration.
A frame whose source MAC address matches different types of MAC address entries is processed
differently.
Type Description
Static MAC address entry
• Discards the frame received on a different interface from that in the entry.
• Forwards the frame received on the same interface with that in the entry.
Multiport unicast MAC
address entry
• Learns the MAC address (for example, MAC A) of the frame, generates a
dynamic MAC address entry for MAC A, and forwards the frame.
However, the generated dynamic MAC address entry does not take
effect. Frames destined for MAC A are forwarded based on the multiport
unicast MAC address entry.
Dynamic MAC address
entry
• Learns the MAC address of the frames received on a different interface
from that in the entry and overwrites the original entry.
• Forwards the frame received on the same interface as that in the entry
and updates the aging timer for the entry.
Adding or modifying a static or dynamic MAC address entry
globally
Step Command Remarks
1. Enter system view.
system-view
N/A
2. Add or modify a
static or dynamic
MAC address
entry.
mac-address
{
dynamic
|
static
}
mac-address
interface
interface-type interface-number
vlan
vlan-id
By default, no MAC address
entry is configured globally.
Make sure you have created
the VLAN and assigned the
interface to the VLAN.
Adding or modifying a static or dynamic MAC address entry
on an interface
Step Command Remarks
1. Enter system view.
system-view
N/A
2. Enter interface view.
• Enter Layer 2 Ethernet
interface view:
interface interface-type
interface-number
• Enter Layer 2 aggregate
N/A

Table of Contents

Other manuals for HPE FlexNetwork 5130 HI SERIES

Related product manuals