HPE FlexNetwork 5130 HI SERIES Configuration Guide

79
Tasks at a glance
• (Optional.) Configuring the device priority
• (Optional.) Configuring the timeout factor
• (Optional.) Configuring the BPDU transmission rate
• (Optional.) Configuring edge ports
• (Optional.) Configuring path costs of ports
• (Optional.) Configuring the port priority
• (Optional.) Configuring the port link type
• (Optional.) Enabling outputting port state transition information
• (Required.) Enabling the spanning tree feature
(Optional.) Performing mCheck
(Optional.) Configuring protection functions
MSTP configuration task list
Tasks at a glance
Configuring the root bridge:
• (Required.) Setting the spanning tree mode
• (Req
uired.) Configuring an MST region
• (Optional.) Configuring the root bridge or a secondary root bridge
• (Optional.) Configuring the device priority
• (Optional.) Configuring the maximum hops of an MST region
• (Optional.) Configuring the network diameter of a switched network
• (Optional.) Configuring spanning tree timers
• (Optional.) Configuring the timeout factor
• (Optional.) Configuring the BPDU transmission rate
• (Optional.) Configuring edge ports
• (Optional.) Configuring the port link type
• (Optional.) Configuring the mode a port uses to recognize and send MSTP packets
• (Optiona
l.) Enabling outputting port state transition information
• (Required.) Enabling the spanning tree feature
Configuring the leaf nodes:
• (Required.) Setting the spanning tree mode
• (Required.) Configuring an MST region
• (Optiona
l.) Configuring the device priority
• (Optional.) Configuring the timeout factor
• (Optiona
l.) Configuring the BPDU transmission rate
• (Optiona
l.) Configuring edge ports
• (Optiona
l.) Configuring path costs of ports
• (Optional.) Configuring the port priority
• (Optional.) Configuring the port link type
• (Optional.) Configuring the mode a port uses to recognize and send MSTP packets
• (Optional.) Enabling outputting port state transition information
• (Required.) Enabling the spanning tree feature
(Optional.) Performing mCheck
(Optional.) Configuring Digest Snooping
(Optional.) Configuring No Agreement Check

HPE FlexNetwork 5130 HI SERIES Specifications

General

Brand	HPE
Model	FlexNetwork 5130 HI SERIES
Category	Switch
Language	English