HPE OfficeConnect 1950 Series Getting Started Guide

35
Figure 42 Rear panel
(1) AC-input power receptacle (2) DC-input power receptacle
(3) Grounding screw
Technical specifications
Table 11 Technical specifications for non-PoE switch models
Item
HPE 1950 24G 2SFP+
2XGT
HPE 1950 48G 2SFP+
2XGT
HPE 1950 12XGT 4SFP+
Dimensions (H ×
W × D)
43.6 × 440 × 160 mm
(1.72 × 17.32 × 6.30 in)
43.6 × 440 × 270 mm
(1.72 × 17.32 × 10.63 in)
43.6 × 440 × 260 mm (1.72 ×
17.32 × 10.24 in)
Weight ≤ 3 kg (6.61 lb) ≤ 5 kg (11.02 lb) ≤ 3.8 kg (8.38 lb)
Console ports 1 × serial console port 1 × serial console port
• 1 × mini USB console
port
• 1 × serial console port
Only the mini USB console
port is available when you
connect both ports.
Management
Ethernet ports
N/A N/A 1
10/100/1000Base
-T Ethernet ports
24 48 N/A
1/10G Base-T
Ethernet ports
2 2 12
SFP+ ports 2 2 4
Input voltage
• AC power source
{ Rated voltage: 100 VAC to 240 VAC @ 50 or 60 Hz
{ Max voltage: 90 VAC to 264 VAC @ 47 to 63 Hz
• DC power source: HPE A-RPS800 (JD183A)
{ Rated voltage range: 11 VDC to 12 VDC
{ Max voltage range: 10.8 VDC to 13.2 VDC
NOTE:
Only the HPE 1950 12XGT 4SFP+ switch supports DC power supply.
Power
consumption
(static)
AC: 20 W AC: 30 W
• AC: 26 W
• DC: 22 W
Power
consumption (full
configuration)
AC: 34 W AC: 46 W
• AC: 74 W
• DC: 68 W

HPE OfficeConnect 1950 Series Specifications

General

Model	HPE OfficeConnect 1950 Series
Switch Type	Managed
Layer	Layer 2/3
Switching Capacity	Up to 176 Gbps
MAC Address Table Size	16, 000 entries
Routing Protocol	Static, RIP, OSPF
Operating Temperature	0°C to 45°C
QoS Support	Yes
Ports	24 or 48 Gigabit Ethernet ports
10G Ports	Optional 2 or 4 SFP+ ports
PoE Support	Yes
Stacking	Yes (up to 4 switches)
Management	Web-based, SNMP, CLI
Security	802.1X, ACLs, Port Security
Forwarding Rate	Up to 131 Mpps
Power Supply	Internal
Dimensions	Varies by model
Weight	Varies by model
Operating Humidity	10% to 90% non-condensing