41
Table 18 SFP+ transceiver modules available for the SFP+ ports
Produ
ct
Code
HPE
description
Central
wavelengt
h (nm)
Connecto
r
Fiber
diameter
(µm)
Modal
bandwidth
(MHz × km)
Max
transmission
distance
JD092B
HPE X130
10G SFP+ LC
SR
Transceiver
850 LC
Multi-mode,
50/125
2000
300 m (984.25
ft)
500 82 m (269.03 ft)
400 66 m (216.54 ft)
Multi-mode,
62.5/125
200 33 m (108.27 ft)
160 26 m (85.30 ft)
JD094B
HPE X130
10G SFP+ LC
LR
Transceiver
1310 LC
Single-mode,
9/125
N/A
10 km (6.21
miles)
Table 19 SFP+ network cables available for the SFP+ ports
Product code HPE description Max transmission distance
JD095C HPE X240 10G SFP+ SFP+ 0.65m DA Cable 0.65 m (2.13 ft)
JD096C HPE X240 10G SFP+ SFP+ 1.2m DA Cable 1.2 m (3.94 ft)
JD097C HPE X240 10G SFP+ SFP+ 3m DA Cable 3 m (9.84 ft)
JG081C HPE X240 10G SFP+ SFP+ 5m DA Cable 5 m (16.40 ft)
NOTE:
As a best practice, use HPE 1000 Mbps SFP transceiver modules, SFP+ transceiver modules, or
SFP+ network cables for the SFP+ ports on the switch. HPE 1000 Mbps SFP and SFP+ transceive
modules available for the switch are subject to change over time. For the most up-to-date list of SFP
and SFP+ transceiver modules, contact your Hewlett Packard Enterprise sales representative or
technical support engineer.
For more information about the 1000 Mbps SFP transceiver modules, SFP+ transceiver modules,
and SFP+ network cables, see HPE Comware-Based Devices Transceiver Modules User Guide.
Figure 43 SFP+ network cable
(1) Connector (2) Pull latch
1
1
2