CAUTION: THE CONTACTS ARE VERY FRAGILE AND EASILY DAMAGED. To avoid damage to the socket or
processor, do not touch the contacts.
2. Power down the server.
3. Remove all power:
a. Disconnect each power cord from the power source.
b. Disconnect each power cord from the server.
4. Do one of the following:
• Extend the server from the rack (
Extend the server from the rack).
• Remove the server from the rack (Removing the server from the rack).
5. Remove the access panel (
Removing the access panel).
CAUTION: Do not operate the server for long periods with the access panel open or removed. Operating the server
in this manner results in improper airflow and improper cooling that can lead to thermal damage.
6.
If installed, do the following:
a.
Remove the air bale (Removing and replacing the air bale).
b.
Remove the processor mezzanine tray (
Removing and replacing the processor mezzanine tray).
c.
Remove the CPU Mezzanine UPI performance kit (Removing and replacing the CPU Mezzanine UPI performance
kit).
NOTE: Depending on the server configuration, your heatsink might appear
dierent.
7.
Remove the processor and heatsink assembly:
a.
Allow the heatsink to cool.
b.
Loosen the heatsink nuts in the order specified by the label on the heatsink (4 - 3 - 2 - 1).
54
Removal and replacement procedures
To Next Page
Loading...
