c. Lift the processor heatsink assembly up and away from the system board.
d. Turn the assembly over and place it on a work surface with the processor facing up.
e.
Install the dust cover.
8.
Install the processor heatsink assembly:
a.
Locate the Pin 1 indicator on the processor carrier and the socket.
b.
Align the processor heatsink assembly with the heatsink alignment pins and gently lower it down until it sits evenly
on the socket.
The heatsink alignment pins are keyed. The processor heatsink assembly will only install one way.
Your heatsink may look
dierent than the one shown.
Removal and replacement procedures
55
To Next Page
Loading...
