HPRT HM-E200 - GS a N; GS F N; GS H N

HM-E200 Programming Manual
28
GS a n
[Name] Enable/disable Automatic Status Back (ASB)
[Format] ASCII GS a n
Hex 1D 61 n
Decimal 29 97 n
[Range] 0 ≤ n ≤ 255
[Default] n = 0 (when DIP switch or memory switch (BUSY condition) is off)
n = 2 (when DIP switch or memory switch (BUSY condition) is on)
GS f n
[Name] Select font for HRI characters
[Format] ASCII GS f n
Hex 1D 66 n
Decimal 29 102 n
[Range] n = 0, 1, 48, 49
[Description] • Selects a font for the HRI characters when printing a bar code.
n
Font for the HRI characters
0,48
Character font A (12 × 24)
1,49
Character font B (9 × 17)
[Notes]

HRI indicates Human Readable Interpretation.

HRI characters are printed using the font specified by GS H.
[Default] n = 0
GS h n
[Name] Select bar code height
[Format] ASCII GS h n
Hex 1D 68 n
Decimal 29 104 n
[Range] 1 ≤ n ≤ 255
[Description] Selects the height of the bar code.
n specifies the number of dots in the vertical direction.
[Default] n = 162