HT I-V600 - Page 65

I-V600
EN - 64
5. Tap on the "Current” key to display the I-V @STC curve. The following screen will
appear:
Fig. 73: Retrieving the I-V curve measurement results - Current curve @STC
6. Tap on the "Power” key to display the I-V @STC power curve as shown in the figure
below:
Fig. 74: Retrieving the I-V curve measurement results - Power curve @STC
7. Scroll the screen to the right to display the @OPC values. The following screen will
appear:
Fig. 75: Retrieving the I-V curve measurement results - Values @OTC