Tools and Calendar 199
1. Open the Notifications panel, and then touch .
2. If Bluetooth is off, touch the Bluetooth On/Off switch to turn it on.
3. Touch Bluetooth. The Bluetooth screen opens.
4. Touch the headset’s name in the Paired devices section.
5. If prompted to enter a passcode, try 0000 or 1234, or consult the headset documentation
to find the passcode.
If you still cannot reconnect to the headset or car kit, follow the instructions in Disconnect or
Unpair From a Bluetooth Device, and then follow the steps in Connect a Bluetooth Headset or
Car Kit.
Disconnect or Unpair From a Bluetooth Device
If you do not need to use Bluetooth at any given point, you can disconnect and unpair your
phone from a Bluetooth device.
Disconnect a Bluetooth Device
1. Open the Notifications panel, and then touch .
2. Touch Bluetooth. The Bluetooth screen opens.
3. In the Paired devices section, touch the name of the device to disconnect.
4. Touch OK.
Note: Touch the name of the device to reconnect it.
Unpair From a Bluetooth Device
1. Open the Notifications panel, and then touch .
2. If Bluetooth is off, touch the Bluetooth On/Off switch to turn it on.
3. Touch Bluetooth. The Bluetooth screen opens.
4. In the Paired devices section, touch next to the device to unpair.
5. Touch Unpair.
Send Information Using Bluetooth
You can use Bluetooth to transfer information between your phone and another Bluetooth-
enabled device such as a phone or notebook computer. The first time you transfer information
between your phone and another device, you need to enter or confirm a security passcode.
After that, your phone and the other device are paired, and you will not need to exchange
passcodes to transfer information in the future.
To Next Page
Loading...
