Figure 5-37 Installing a supercapacitor tray
Step 9 Remove the riser card tray if a full-height full-length riser card is configured. For details, see
3.12 Removing a Riser Card Tray.
Step 10 Hold down the latches on the cables to the RAID controller card, and remove the cables from
the RAID controller card. For details, see 7 Internal Cabling.
Step 11 Loosen the screws on the RAID controller card. See (1) in Figure 5-38.
2288H V5 Server
User Guide
5 Optional Part Installation
Issue 04 (2018-09-04) Copyright © Huawei Technologies Co., Ltd. 145
To Next Page
Loading...
