Querying the IP Address on the iBMC CLI
Step 1 Log in to the iBMC CLI.
For details, see 14.3 Logging In to the iBMC CLI.
Step 2 Run the ipmcget –d ipinfo command.
For details, see the Huawei Rack Server iBMC User Guide.
----End
14.2 Logging In to the Remote Virtual Console
Step 1 Log in to the iBMC WebUI.
For details, see 4.6.4 Logging In to the iBMC WebUI.
Step 2 Choose Remote Console.
The Remote Console page is displayed, as shown in Figure 14-4.
Figure 14-4 Remote Console page
2288H V5 Server
User Guide
14 Common Operations
Issue 04 (2018-09-04) Copyright © Huawei Technologies Co., Ltd. 260
To Next Page
Loading...
