Figure 3-17 Connecting a supercapacitor
Step 10 Install the full-height full-length riser card tray as required. For details, see 3.13 Installing a
Riser Card Tray.
Step 11 Install the chassis cover. For details, see 3.5 Installing the Chassis Cover.
Step 12 Install the server. For details, see 4.4 Installing the Server on Guide Rails.
Step 13 Connect the power cables. For details, see 5.4 PSU.
Step 14 Power on the server. For details, see 3.1 Powering On the Server.
----End
3.10 Removing the Built-in Drive Assembly
Step 1 Wear an ESD wrist strap. For details, see 12 Preventing Electrostatic Discharge.
Step 2 Power off the server. For details, see 3.2 Powering Off the Server.
Step 3 Remove the power cables. For details, see 3.7 Removing Cables from a PSU.
Step 4 Remove the server. For details, see 3.3 Removing the Server and Guide Rails.
Step 5 Remove the chassis cover. For details, see 3.4 Removing the Chassis Cover.
Step 6 Remove all drives from the drive module. For details, see 5.3.1 Removing a SAS/SATA
Drive.
2288H V5 Server
User Guide
3 Basic Operations
Issue 04 (2018-09-04) Copyright © Huawei Technologies Co., Ltd. 58
To Next Page
Loading...
