l During parts replacement, keep new server components in ESD bags before installation,
and place removed server components on ESD mats for temporary storage.
l Do not touch welding points, pins, or exposed circuits.
12.2 ESD Wrist Strap
Ensure that the cabinet or chassis has been properly grounded.
Step 1 Put on the ESD wrist strap. See Figure 12-2.
Figure 12-2 Wearing an ESD wrist strap
Step 2 Tighten the ESD wrist strap and ensure that it is in good contact with your bare skin.
Step 3 Insert the ground terminal of the ESD wrist strap into the ESD jack in the cabinet or chassis.
----End
2288H V5 Server
User Guide
12 Preventing Electrostatic Discharge
Issue 04 (2018-09-04) Copyright © Huawei Technologies Co., Ltd. 246
To Next Page
Loading...
