Figure 14-17 PuTTY Configuration window
Step 8 Set Close window on exit to Only on clean exit, as shown in Figure 14-17.
Set Saved Sessions and click Save. Next time you can simply double-click the saved settings
under Saved Sessions to log in to the server.
Step 9 Click Open.
The PuTTY window is displayed.
Step 10 Enter the user name and password.
If the login is successful, the server host name is displayed on the left of the prompt.
----End
14.6 Logging In to the Server over a Network Port Using
PuTTY
Use PuTTY to remotely log in to the server over a local area network (LAN) and configure
and maintain the server.
2288H V5 Server
User Guide
14 Common Operations
Issue 04 (2018-09-04) Copyright © Huawei Technologies Co., Ltd. 272
To Next Page
Loading...
