Figure 5-56 Installing a TPM/TCM
Step 9 Tighten the screw on the TPM/TCM using a Phillips screwdriver. See (2) in Figure 5-56.
Step 10 Install the chassis cover. For details, see 3.5 Installing the Chassis Cover.
Step 11 Install the server. For details, see 4.4 Installing the Server on Guide Rails.
Step 12 Connect the power cables. For details, see 5.4 PSU.
Step 13 Power on the server. For details, see 3.1 Powering On the Server.
Step 14 Log in to the iBMC WebUI, and check whether the new component is normal. For details, see
the Huawei Rack Server iBMC User Guide.
----End
5.14.2 Enabling the TPM/TCM
Enabling the TPM
Step 1 Access the BIOS. For details, see 4.6.8 Configuring the BIOS.
Step 2 Select Security.
Step 3 Select TPM Operation and press Enter.
Step 4 Select Enable.
Step 5 Press F10.
The Exit Saving changes? dialog box is displayed.
Step 6 Select Yes and press Enter.
2288H V5 Server
User Guide
5 Optional Part Installation
Issue 04 (2018-09-04) Copyright © Huawei Technologies Co., Ltd. 165
To Next Page
Loading...
