Lift the latch while pulling out the holding rail away from the mounting bar. See (6) and (7) in
Figure 3-7.
Step 7 Remove the other guide rail in the same way.
----End
3.4 Removing the Chassis Cover
Step 1 Wear an ESD wrist strap. For details, see 12 Preventing Electrostatic Discharge.
Step 2 Power off the server. For details, see 3.2 Powering Off the Server.
Step 3 Remove the power cables. For details, see 3.7 Removing Cables from a PSU.
Step 4 Remove the server. For details, see 3.3 Removing the Server and Guide Rails.
Step 5 Loosen the handle screw of the cover using a flat-head screwdriver. See (1) in Figure 3-8.
Figure 3-8 Removing the chassis cover
Step 6 Pull out the handle to push the chassis cover backwards. See (2) in Figure 3-8.
Step 7 Lift the chassis cover. See (3) in Figure 3-8.
----End
2288H V5 Server
User Guide
3 Basic Operations
Issue 04 (2018-09-04) Copyright © Huawei Technologies Co., Ltd. 50
To Next Page
Loading...
