EasyManua.ls Logo

Huawei 2288H V5 - Drive Backplane Connectors

Huawei 2288H V5
294 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
9 10GE optical port (10GE PORT1/J131) or
10GE electrical port (10GE PORT1/J100)
NOTE
A 10GE optical port is available on a
mainboard that provides two 10GE optical
ports and two GE electrical ports. A 10GE
electrical port is available on a mainboard
that provides two 10GE and two GE
electrical ports.
10 VROC key port (J130)
11 Riser card slot 1 (corresponding to CPU 1;
J108)
12 Rear drive backplane power connector 2 (REAR BP
PWR2/J126)
13 NC-SI connector (NCSI CONN/J99) 14 SATA signal connector 2 (SATA2/J71)
15 SATA signal connector 1 (SATA1/J67) 16 CPU 1 slimline connector (CPU1 SLIMELINE/J170)
17 Mini-SAS HD connector C (MINIHD PORT C/
J85)
18 Mini-SAS HD connector B (MINIHD PORT B/J84)
19 Mini-SAS HD connector A (MINIHD PORT A/
J86)
20 Rear drive backplane power connector 1 (REAR BP
PWR1/J127)
21 USB 3.0 port (FRONT USB3.0/J173) 22 Right mounting ear connector (RCIC/RCIF/RCIG
BOARD/J167)
23 TPM/TCM port (TPM CONN/J55) 24 LCD connector (LCD CONN/J87)
25 VGA connector (VGA BOARD/J160) 26 Fan 4 connector (2U FAN4/J148)
27 Fan 3 connector (2U FAN3/J145) 28 Fan 2 connector (2U FAN2/J146)
29 Fan 1 connector (1U/2U FAN1/J105) 30 Drive backplane connector (HDD BP CONN/J162)
31 Built-in drive power connector (INNER HDD
PWR/171)
32 Drive backplane power connector 1 (HDD BP
PWR2/J128)
33 Drive backplane power connector 2 (HDD BP
PWR2/J166)
34 Rear drive backplane power connector 3 (REAR BP
PWR3/J172)
35 Rear 4 x 2.5-inch drive backplane low-speed
signal connector (REAR 4*2.5 HDD BP/J164)
36 CPU 2 slimline A connector (CPU2 SLIMLINE A/
J140)
37 CPU 2 slimline B connector (CPU2 SLIMLINE
B/J139)
38 PSU 2 connector (J157)
39 PSU 1 connector (J156) 40 Built-in drive low-speed signal connector (INNER
HDD BP/J122)
41 Left mounting ear connector (LCIA BOARD/
J161)
42 Jumper (J176)
NOTE
COM_SW pins are used for changing the serial
port direction, and CLR_BMC_PW pins are used
for restoring the default iBMC settings.
43 I/O NIC connectors (IO BOARD/J159/J158) 44 RAID controller card connector (RAID CARD/J48)
45 Riser card slot 2 (CPU 2/J155) - -
2.7 Drive Backplane Connectors
Figure 2-22 shows the connectors on the drive backplane connecting eight 2.5-inch drives.
2288H V5 Server
User Guide
2 Components
Issue 04 (2018-09-04) Copyright © Huawei Technologies Co., Ltd. 18

Table of Contents

Related product manuals